+36302147515

2234 Maglód, Lövéte u. 30/4.

08:30 - 16:30

Monthly Archives: October 2013

Mester Profil

5 October 2013 Posted by Ábrahám Péter No Comments

Megjelentünk a régiós Mester Profil kiadványban ezen írásunknak köszönhetően. Bizony, másnak is fontos lehet az adatmentés, nem csak nekünk. Ezt szerintem mindenki tudja, aki számítógépet használ,...

Budatranspack kiállítás

3 October 2013 Posted by Ábrahám Péter

Köszönjük minden kedves Partnerünknek és Leendő Partnerünknek a látogatást a kiállításon. Rengetegen jöttek ki, és reméljük jól is érezték magukat! Mi igyekeztünk, hogy senki ne...

PSF Light 130

Parameters	Values
Film thickness	5…30 mkm
Mechanical speed	1200 m/min
Rewinding speed	3340 rpm
Cycle time to rewind 200 m at the speed of 1200 m/min	15 sec
Rewinding inaccuracy regardless of rewinding length	± 1.0 m
Rewinding length	10…800 m
Finished roll diameter, at most	130 mm
Jumbo roll diameter, at most	450 mm
Jumbo roll width	260…500 mm
Finished roll width	260…500 mm
Internal diameter of jumbo roll core	76; 152 mm
Internal diameter of finished roll core	25; 30; 38; 50 mm
Minimal wall thickness of core:
– for core with internal diameter of 25 mm	1.5 mm
– for core with internal diameter of 30 mm	2.0 mm
– for core with internal diameter of 38 mm	2.5 mm
– for core with internal diameter of 50 mm	3.5 mm
Core hopper for 50 mm cores, pcs	up to 55
Compressed air pressure	7…10 bar
Average air consumption, at most, at rewinding length:
– 100 m	110 l/min
– 200 m	80 l/min
– 300 m	60 l/min
Ambient temperature	+10…+35 ºС
Supply voltage	380V, 50Hz
Power consumption, at most	2.5 kWh
Overall dimensions, at most:
a. – depth	1150 mm
b. – width	1180 mm
c. – height	1500 mm
Control panel overall dimensions, at most:
a. – depth	540 mm
b. – width	770 mm
c. – height	990 mm
Monthly productivity (24 operating hours a day)	Up to 150 tons
Net weight of PSF-011L, at most	475 kg
Net weight of PSF-011L with control panel, at most	545 kg

Standard complete set
– Intuitive control
– Ergonomic design
– Fast setup
– Fast changing of jumbos
Additional complete set
– Weighting system WS-2
– Additional pulley for alteration of film tension
– Finished rolls table
– Film torn/over sensor
– Jumbo roll over sensor

PSF 011M

Parameters	Values
Film thickness	5…30 mkm
Mechanical speed	1600 m/min
Rewinding speed	5560 rpm
Rewinding inaccuracy regardless of rewinding length	± 1.0 m
Rewinding length	Up to 1500 m
Finished roll diameter, at most	240 mm
Jumbo roll diameter, at most	450 mm
Cycle time to rewind 200 m at the speed of 1700 m/min	11 sec
Cycle time to rewind 200 m at the speed of 2000 m/min	10 sec
Jumbo roll core width	320…550 mm
Jumbo roll film width	300…500 mm
Finished roll core width	320…550 mm
Finished roll film width	300…500 mm
Internal diameter of jumbo roll core	50, 76, 152 mm
Internal diameter of finished roll core	30; 38; 50; 76 mm
Minimal wall thickness of core:
– for core with internal diameter of 38 mm	3.5 mm
– for core with internal diameter of 50 mm	5 mm
– for core with internal diameter of 76 mm	8 mm
Core hopper for 50 mm cores	Up to 75 pcs
Compressed air pressure	7…10 bar
Average air consumption, at most	250 l/min
Ambient temperature	+10…+35 ºС
Supply voltage	380V, 50Hz
Power consumption, at most	4.8 kWh
Overall dimensions (without control panel), at most:
a. – depth	1740 mm
b. – width	1280 mm
c. – height	1600 mm
Control panel overall dimensions, at most:
a. – depth	540 mm
b. – width	770 mm
c. – height	990 mm
Monthly productivity (24 operating hours a day)	Up to 180 tons
Net weight of PSF-011M, at most	785 kg
Net weight of PSF-011M with control panel, at most	855 kg

Standard complete set
– Operate in any language
– Reverse rewinding
– Monitor finished rolls quantity and those left to rewind
– Stop the machine at the set time or after the set number of finished rolls
Additional complete set
– Weighting system WS-2
– Additional pulley for alteration of film tension
– Finished rolls table
– Film torn/over sensor
– Jumbo roll over sensor
– Additional soundproof cover

PSF 011M2

Parameters	Values
Film thickness	5…30 mkm
Mechanical speed	1600 m/min
Rewinding speed	5000 rpm
Rewinding inaccuracy regardless of rewinding length	± 1.0 m
Finished roll diameter, at most	240 mm
Jumbo roll diameter, at most	450 mm
Cycle time to rewind 200 m at the speed of 1800 m/min	11 sec
Jumbo roll core width	320…550 mm
Jumbo roll film width	300…500 mm
Finished roll core width	320…550 mm
Finished roll film width	300…500 mm
Internal diameter of Jumbo roll core	50, 76, 152 mm
Internal diameter of finished roll core	30; 38; 50; 76 mm
Core hopper for 50 mm cores	Up to 75 pcs
Compressed air pressure	7…10 bar
Average air consumption, at most	250 l/min
Ambient temperature	+10…+35 ºС
Supply voltage	380V, 50 Hz
Power consumption, at most	4.8 kWh
Overall dimensions, at most:
a. – depth	1740 mm
b. – width	1280 mm
c. – height	1600 mm
Control panel overall dimensions, at most:
a. – depth	540 mm
b. – width	770 mm
c. – height	990 mm
Monthly productivity (24 operating hours a day)	Up to 160 tons
Net weight of PSF-011M2, at most	845 kg
Net weight of PSF-011M2 with control panel, at most	915 kg

Standard complete set
– Operate in any language
– Reverse rewinding
– Monitor finished rolls quantity and those left to rewind
– Stop the machine at the set time or after the set number of finished rolls
Additional complete set
– Weighting system WS-2
– Finished rolls table
– Film torn/over sensor
– Jumbo roll over sensor
– Additional soundproof cover

MR500

Parameters	Values
Maximal diameter of jumbo roll, at most	450 mm
Maximal diameter of finished roll, at most	150 mm
Internal diameter of jumbo roll core	50, 76 mm
Internal diameter of finished roll core	30, 38, 50, 76 mm
Maximal width of jumbo roll, at most	520 mm
Width of finished roll	520 mm
Maximal mechanical speed	200 m/min
Rewinding inaccuracy regardless of rewinding length	±1,0 m
Minimal wall thickness of core:
– for core with internal diameter of 30, 38 mm;	3,5 mm
– for core with internal diameter of 50 mm	5,0 mm
– for core with internal diameter of 76 mm;	8,0 mm
Compressed air pressure	7…10 bar
Air consumption, at most	20 l/min
Power consumption, at most	10 kWh
Ambient temperature	+10…+35 ºС
Supply voltage	220V±10%, 50 Hz
Overall dimensions, at most:
a. – depth;	720 mm
b. – width;	1034 mm
c. – height;	516 mm
Monthly productivity (24 operating hours a day)	20 tons
Weight, at most	90 kg

Features of the new model MR-500
– low cost of the equipment
– ease of maintenance
– low-skilled staff
– compact dimensions
– comfortable ergonomics
– able for a used core
– table frame construction

Additional complete set
– Equipment for winding on core with internal diameter 30, 38, 76 mm
– Auxiliary table

PSF Coreless

Parameters	Values
Film thickness	5…30 mkm
Mechanical speed	1200 m/min
Rewinding inaccuracy regardless of rewinding length	± 1.0 m
Monthly productivity (24 operating hours a day)	Up to 100 tons
Jumbo roll diameter, at most	500 mm
Finished roll diameter, at most	250 mm
Jumbo roll film width	300…500 mm
Paper core width	320…550 mm
Internal diameter of jumbo roll core	76, 152 mm
Internal diameter of finished roll core	50, 76 mm
Compressed air pressure	7…10 bar
Average air consumption, at most	270 l/min
Ambient temperature	+10…+35 ºС
Supply voltage	380V, 50Hz
Power consumption, at most	7.5 kWh
Overall dimensions	2.01.21.2 m
Net weight	950 kg

Standard complete set
– Operate in any language
– Reverse rewinding
– Monitor finished rolls quantity and those left to rewind
– Stop the machine at the set time or after the set number of finished rolls
Additional complete set
– Weighting system WS-2
– Additional pulley for alteration of film tension
– Finished rolls table
– Film torn/over sensor
– Jumbo roll over sensor
– Additional soundproof cover

PSF Pre-stretch

Parameters	Values
Film thickness	5…30 mkm
Mechanical speed	1200 m/min
Rewinding speed	3340 rpm
Rewinding inaccuracy regardless of rewinding length	1.0 m
Finished roll diameter, at most	250 mm
Jumbo roll diameter, at most	500 mm
Jumbo roll core width	320…550 mm
Jumbo roll film width	300…500 mm
Finished roll core width	320…550 mm
Finished roll film width	300…500 mm
Internal diameter of jumbo roll core	76; 152 mm
Internal diameter of finished roll core	50; 76 mm
Core hopper for 50 mm cores	Up to 75 pcs
Compressed air pressure	7…10 bar
Standard air consumption, at most	750 l/min
Ambient temperature	+10…+35 ºС
Supply voltage	380V, 50Hz
Power consumption, at most	12 kWh
Overall dimensions (without control panel), at most:
a. – depth;	2430 mm
b. – width;	1210 mm
c. – height;	1450 mm
Control panel overall dimensions, at most:
a. – depth;	670 mm
b. – width;	1000 mm
c. – height;	970 mm
Monthly productivity (24 operating hours a day)	Up to 100 tons
Net weight of PSF-011P, at most	1130 kg
Net weight of PSF-011P with control panel, at most	1200 kg

Standard complete setAdditional features:
– The system of tucking the edge improves the strength characteristics of the finished roll
– The forced aeration APIS can get rolls of varying winding density
– The system of additional shafts reduces radial load on a cardboard core

Machine software allows to:
– Operate in any language
– Monitor finished rolls quantity and those left to rewind
– Stop the machine at the set time or after the set number of finished rolls

Main features:
– Easy loading
– Intuitive controls
– Reliable pre-stretch unit
– Ergonomic design
– Fast setup
Additional complete set
– Weighting system for film rewinding by weight WS-2
– Table for end rolls

WS2

Parameters	Values
Weighting cycle	7 sec
Measurement error	± 5 g
Maximum measured weight	15 kg
Air pressure	6 ± 0,5 bar
Air consumption	1,0 l/min
Ambient temperature	+10…+35
Supply voltage	220V ± 10%, 50Hz
Dimensions : D x W x H	300 х 700 х 590-840 mm
Weight	35 kg

Standard complete set
WS-2 is an optional accessory and is designed to weight up in rolls, analysis and subsequent adjustment weight on the set value automatically. WS-2 can be optionally equipped with following models of automatic rewinders: PSF-011L, PSF-011M, PSF-011M2

CS2

Parameters	Values
Internal diameter of cut paper core	more than 20 mm
External diameter of cut paper core	Up to 230 mm
Core cutting length	More than 180 mm
Wall thickness of cut paper core	2 ÷ 15 mm
Cutting accuracy	± 1 mm
Axial height	1250 ± 50 mm
Productivity	Up to 40 cycles/min
Weight	1000 kg
Overall dimensions (L × W × H)	1630 × 1390 × 1561 mm

Standard complete set
Servomotor for incremental feed knife
Servomotor to move the carriage
Gear motor for rotating knife
Disk Knife D = 150mm, d = 70mm, T = 3mm
System of determination of the linear speed of paper core feed
Equipment for cutting paper core (customer diameter)
Touch control panel
PLC-controller to preset parameters of cutting
Additional complete set
PR Table for cut cores (optional)

SAR

Parameters	Values
Maximal diameter of jumbo roll, at most	450 mm
Maximal diameter of finished roll, at most	250 mm
Finished roll diameter (turret type), at most	150 mm
Internal diameter of jumbo roll core	76 mm
Internal diameter of finished roll core	25, 30, 38, 50, 76 mm
Maximal width of jumbo roll, at most	600/1000 mm
Width of finished roll	up to 600/1000 mm
Maximal mechanical speed	500 m/min
Rewinding speed	1400 rpm
Rewinding inaccuracy regardless of rewinding length	± 1.0 m
Minimal wall thickness of core:
– for core with internal diameter of 25 mm;	2 mm
– for core with internal diameter of 30, 38 mm;	3.5 mm
– for core with internal diameter of 50 mm;	5 mm
– for core with internal diameter of 76 mm;	8 mm
Compressed air pressure	7…10 bar
Air consumption, at most	50 l/min
Power consumption, at most	1.0 kWh
Ambient temperature	+10…+35º С
Supply voltage	220V, 50Hz
Overall dimensions, at most:
a. – depth;	1280 mm
b. – width;	1095/1495 mm
c. – height.	1238 mm
Monthly productivity (24 operating hours a day)	Up to 50 tons
Weight, at most	250/320 kg

Standard complete set

Semi-automatic stretch film rewinder SAR is available in two versions with a working width of 600 mm (SAR-600) and 1000 mm (SAR-1000).

SAR-600 configurations:

– Standard – Film rewinding from one roll to another

– Configuration A – Film rewinding with ability of longitudinal splitting into two webs

– Configuration B – Turret type rewinding with ability of longitudinal splitting into four webs (end roll diameter is at most 130 mm)
Additional complete set

– Equipment for winding on core with internal diameter from 25 mm to 76 mm

– Slitting into 1-4 webs

– Turret

– Knife device

– Device for rewinding BOPP, PVC film

– Device for coreless rewinding sleeve for baking, silicon paper

Monthly Archives: October 2013

Mester Profil

Budatranspack kiállítás

(Magyar) GDPR Infó

Partner pages

Company pages

További információk

Monthly Archives: October 2013

Tags

(Magyar) GDPR Infó

Partner pages

Company pages

További információk